How To Programme (Rsv) - Newlux SmartChef Digital V100 Bedienungsanleitung

hOW tO PROGRamme (RSV)

You can program the Newlux SmartChef Digital V100 to cook automatically without having to be present.
Once the menu is finished, the appliance will automatically keep the food warm until you cancel it.
1. Select menu, temperature and cooking time.
2. Press the RSV button to enter programming.
3. To choose the meal time, programme the time left to eat. Adjust the
button for minutes. Both buttons only increase. To decrease the waiting time, you have to cancel the
MIN.
programme and start again. For example, if it is 10.00 am and you want to programme the appliance so the
food is ready at 2.30 pm, you programme 4.30 h.
4. Press the button to confirm, or wait for it to stop flashing. The selected menu, the time remaining until the
meal is ready and the
The appliance automatically calculates when to start cooking so the food is ready at the selected time. If you
decide to eat later, remember the appliance keeps the food warm indefinitely until you cancel this menu.
IMPORTANT: To programme the appliance in advance, you must do so at least 3 hours beforehand, if the
time is less, it will start cooking immediately.
| 32
and buttons will remain visible on the display.
OFF
CALENTAR
button for the hours and the
HORA