Yale powr 600 Montage- Und Betriebsanleitung Seite 7

Assambly of the operator:
F
1. Connect wall-bracket „F" with bolt and pin at the tension bracket of the rail
2. Connect pushrod and door-bracket„G"with the trolley
3. Connect drive unit„H"with the brackets„K"to the rail
F
M
Screw wall-bracket„F"between 2-15 cm (depending on available space) above the center
position of the door blade to the lintel.
With angels„L" myou screw drive unit to the ceiling and screw door-bracket„M" on the upper
center position ofthe doorblade
G
H
7
K
L