Technical Data; Manual Time Setting - Technoline WS 9003 Bedienungsanleitung

User manual WS 9003

Technical data:

- Pool and window thermometer
with suction cup
- Quartz clock
- Temperature display in ° C/° F
- Temperature alarm with red flashing LED
- Automatic switching to temperature display
when in water
- Battery: 1 x CR 2025 (included)

Manual time setting:

Press and hold down the "SET" button for 3 seconds, the hour display starts to flash. Now
use "MODE" button to set the correct hour.
Then Press the "SET" button the Minute display starts to flash. Now use "MODE" button
to set the correct minute.
Under the clock mode, Press "MODE" button for 3 seconds then can change time in 12/24
hour format.
Water temperature alarm function:
When the thermometer is in water, it will switch to temperature function automatically.
Once water temperature reaches 40.0° C or higher, th e thermometer will display "Hi" with
red LED flashing.
After taking out thermometer from water, it will return in time mode automatically and then
"Hi" display will disappear and LED turn off accordingly.
Under thermometer mode, Press MODE button for 3 seconds then can change
temperature display in ° C/° F.
F.Y.I.:
Water temperature alarm only effects when the thermometer is in the water.