Decathlon ITIWIT canoe x500 4p Bedienungsanleitung Seite 8

Canoe X500: ref 8552925
Congratulations, you have just purchased an ITIWIT canoe. .Our team is proud to offer you a quality product.Reading this manual carefully will help you to use your
product properly.
1. Directions for use - Preparing the canoe
1.1 Inflating the floor
1.2 Inflating the side tubes
1.3 Positioning the front and rear seats
2. Care, packing and storage
2.1 Care after use
2.2 Drying
2.3 Folding
2.4 Storage
3. Repair
3.1 Loss of pressure
3.2. Spare parts (After Sales Service)
1. DIRECTIONS FOR USE - PREPARING THE CANOE
• Lay out the canoe flat on a clean surface, without any objects that could damage the inflatable structure.
1.1 Inflating the floor
• Locate the high-pressure valve required to inflate the floor
Ensure the valves are in the closed position.
Open position ( *1): the spring is depressed, the valve is open, the air escapes, the canoe deflates.
Closed position ( *2): the spring is released, the valve is closed, connect the pump nozzle to inflate.
• Connect the ITIWIT pump (sold separately) using the pump nozzle ¼ turn (*3) and inflate the floor to 10 PSI. Finish by screwing on the cap
1.2 Inflating the side tubes
• Locate the high-pressure valve required to inflate the side walls and the centre seat
Ensure the valves are in the closed position.
Open position ( *1): the spring is depressed, the valve is open, the air escapes, the canoe deflates.
Closed position ( *2): the spring is released, the valve is closed, connect the pump nozzle to inflate..
• Connect the ITIWIT pump (sold separately) using the pump tip ¼ turn (*3) and inflate the floor to 10 PSI. Finish by screwing on the cap.
1.3 Position the seats
• Locate the front seat and rear seat based on the shape of the canoe.
• Position the seats using the straps located under the walls.(*5) The craft is ready for launch. Warning: Do not carry the canoe when loaded.
USER MANUAL - CANOE TOURING X500 ITIWIT
p.6