Rollei LUMIS Anleitung Seite 31

Setting up the Rollei LUMIS Slim RGB Ring Light
on the Light Stand
• Screw the telescope pole in the hole of the base of the light stand.
• Turn the light stand lock [8] counterclockwise until the screw in side
no longer blocks the recess in the light stand connection [3].
• Place the light stand connection [3] of the Rollei LUMIS Slim RGB
Ring Light on the light stand and screw the screw of the light stand
lock [8] clockwise again.
• Flexibly adjust the height via the two quick release fasteners.
Installation of the Smartphone Holder
on the Rollei LUMIS Slim RGB Ring Light
• Screw the 1/4" screw of the smartphone holder into one of the
1/4" screw threads [6] on the LUMIS Slim RGB Ring Light.
• Insert your smartphone and adjust it.
31