Intended Use; Safety Information - Manupro MPSCST255MM Bedienungsanleitung

• Table width extension (2x)
• Push stick
• Pillars (4x)
• Centre struts (4x)
• Rubber feet (4x)
• Stand bracket (2x)
• Table supports (4x)
• Manual
• Hexagon head screw with cross slot with mounted
U-washer / spring washer 16 units (a)
• Carriage bolt, 19 units (b)
• U-washer, 27 units (c)
• Spring washer, 20 units (d)
• Nuts, 27 units (e)
• Ring spanner SW 10/22 (f)
• Open-end spanner SW 10 (g)
• Allen key HX 6 (h)
• Hexagon head srew (k)

4. Intended Use

The table circular saw is used for cutting all types of
wood lengthwise and crosswise (only with the trans-
verse stop), depending on the machine size. All types
of round timbers must not be cut with it.
The machine may be used only for its prescribed
purpose. Any other use beyond that is considered to
be not in accordance with the designated purpose.
The user/operator is liable for all types of resulting
damage or injury and not the manufacturer.
The only saw blades which may be used are those
which are suitable for the machine (HM or CV saw
blades). The use of any type of HSS saw blades and
cutting discs is prohibited.
Use in accordance with the designated purpose is
also deemed to include observance of the safety in-
structions, as well as the assembly and operating in-
structions in the operating manual.
Individuals who operate and maintain the machine
must be familiar with it and must have been instruct-
ed in possible hazards. Moreover, the latest accident
prevention regulations must be strictly observed.
Other general rules in the fields of occupational
health and safety technology must be complied with.
m Caution!
When using equipment, certain safety precautions
must be complied with in order to avoid injuries and
damage. You should therefore read these operating
instructions / safety instructions carefully. Keep these
in a safe place so that the information is available to
you at all times. Should you give the device to anyone
else, please give them these operating instructions
/ safety instructions as well. We assume no liability
for accidents or damage caused by failure to observe
these instructions or the safety instructions
Changes to the machine will cause the manufacturer'
s liability with respect to any resulting damage to be
completely excluded.
Even when the device is used in accordance with the
designated purpose, it is nevertheless not possible
to completely eliminate certain residual risk factors.
Due to the design and structure of the machine, the
following risks may occur:
• Touching the saw blade in the area of the saw
which is not covered;
• Reaching into the running saw blade (cuts)
• Kickback of workpieces and workpiece parts.
• Saw blade breaks.
• Ejection of faulty hard metal parts of the saw blade.
• Hearing damage if the necessary hearing protec-
tion is not used.
• Emissions of wood dust which are harmful to the
health when used in closed rooms.
m Please note that the use of our devices in accord-
ance with the designated purpose does not include
commercial, handicraft or industrial applications. We
assume no warranty if the device is used in commer-
cial, handicraft or industrial businesses or for equiv-
alent purposes.

5. Safety information

General power tool safety warnings
m WARNING: Read all safety warnings, instruc-
tions, illustrations and technical data provided
with this power tool.
Failure to follow the warnings and instructions may re-
sult in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
GB | 29