Original Operating Instructions - Metabo SPA 1702 W Originalbetriebsanleitung

Original operating instructions

Dear Customer,
Thank you for the trust you have placed in us by buying a metabo dust extractor. Every metabo
machine is carefully tested and subjected to stringent quality control procedures by the metabo
quality assurance department. Nevertheless, the service life of a machine depends to a great extent
on you. Please read the information in these operating instructions and the accompanying
documents. The greater the care with which you handle your metabo machine, the longer it will
provide a reliable service to you.
Contents
Illustration: Parts Supplied (Page 3)
Illustration: Appliance Components (Page 4)
1 Mains Voltage / Order No.
2 Parts Supplied
3 Appliance Components
4 Safety Instructions
5 Proper Use
6 Assembly
6.1 Base
6.2 Castors and wheels
6.3 Suction unit
6.4 Filter, filter retaining clip and chip bag
6.5 Suction hose
7 Initial Use
8 Maintenance
9 Accessories
10 Repairs
11 Environmental Protection
12 Technical Specifications
1 Mains Voltage / Order No.
Before initial use, check that the mains voltage
and mains frequency stated on the model plate
match the figures for your own mains supply
(refer to page 16).
2 Parts Supplied
1) Filter (Category "G")
2) Filter retaining clips
5) Filter clamping band
6) Suction unit
8) Hose clamp (2 pcs.)
9) Chip bag clamping band
10) 100 mm Ø suction hose, 2.5 m long
11) Chip bag
12) Connector
13) Castors (2 pce.)
14) Base-plate
15) 125 mm Ø wheels (2 pce.)
16) Column
18) Set of sundry assembly parts
19) Operating Instructions
20) List of Spare Parts
Sundry parts (in bag):
M6x16 hexagonal socket-head screws
M8x60 hexagonal-head screws
M6 hexagonal nuts
M8 hexagonal nuts
6.4 washers
8.4 washers
Автотовары «130»
ENGLISH
9 pce.
2 pce.
9 pce.
6 pce.
9 pce.
12 pce.
13