Placement Options - Philips PicoPix Max One PPX520 Bedienungsanleitung

Manual horizontal correction
You can manually correct keystone or distorted
images in the horizontal orientation.
1 Make sure you have selected Auto Keystone
- Off to enable this function. Press
the remote control to access the settings
menu, then navigate to select Manual
Horiz. Keyst.
2 Press / to adjust the image shape.
Calibration
Correct the image to be rectangular when the
projector is placed level, or if the auto keystone
correction does not correct the image ideally.
Perform image shape calibration as follows.
1 Make sure you have selected Auto Keystone
- Off to enable this function. Place the
projector on the floor, or a straight (level)
surface.
2 Press on the remote control to access
the settings menu, then navigate to select
Keystone Calibration.
10

Placement options

You can install the projector in the following
configurations. Follow the guidelines below for
different projector placement.
Notice
For overhead mounting on ceiling,
purchase a projector mount
recommended by an installation
professional and follow the instructions
that come with the mount.
Before mounting on the ceiling, make
sure the ceiling can support the weight
of the projector and mounting kit.
For ceiling installation, this product
on must be securely attached to the ceiling
in accordance with the installation
instructions. An improper ceiling
installation may result in accident, injury
or damage.
Front table
1 Place the projector on a table in front of the
projection screen. This is the most common
way to position the projector for quick
setup and portability.
2 To adjust projection to the correct position,
press
settings menu, then navigate to select Proj.
Direc. - Front proj., then press OK.
Front ceiling
1 Mount the projector on the ceiling with
upside up in front of the projection screen.
A projector mount is required to mount the
projector on ceiling.
on remote control to access the
Philips · PicoPix Max One