Service And Maintenance; Technical Support - Werock Rocktab S100 Bedienungsanleitung

7.
The initial setup screens are complete, and the desktop is displayed.
8.
Read any introductory screens describing features of your computer, and tap Next upon
completing each. You are now done with the initial setup process.

Service and maintenance

Notes on service and maintenance work
Only experienced electronics personnel should open the computer housing. Do not open the housing. It
does not contain any parts that can be maintained by the user. Opening the housing will void the warranty.
Always completely remove the power cable from the case when working with the hardware. Always ground
yourself to remove static charges from your body before touching internal parts. Modern electronic devices
are very sensitive to electrical charging. As a safety precaution, always use a grounding bracelet. Place all
electronic components on a static-dissipative surface or in a static-shielded bag if they are not inside the
housing.
Trennen Sie das Gerät immer von Ihrer Stromversorgung bevor sie es reinigen. Benutzen Sie
keine Säure, Ätzflüssigkeit oder Spraywaschmittel zur Reinigung. Eine gute Option ist es ein feuchtes
Tuch zu verwenden.

Technical support

For the most up-to-date information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.), visit www.werocktools.com
This manual contains simple troubleshooting instructions. In case of complete failure or serious damage,
please contact your distributor, sales representative or customer support if you need further assistance.
Rocktab S100 User Manual
67 / 76