7. Programming
1
Mode/Enter Set
Mode/Enter Set
2
3
Mode/Enter Set
Wait 5s (the unit passes to the operating mode and
the current measured value is indicated again),
or start again with step 1 to program other parameters.
*Decrease the value: Let the display of the parameter value move to the
maximum setting value. Then the cycle starts again at the minimum setting
value.
Locking / unlocking:
The unit can be electronically locked to prevent unwanted adjustment
of the set parameters: Press both pushbuttons for 10 s. Indication goes
out briefly (acknowledgement of locking / unlocking).
Units are delivered from the factory in the unlocked state.
20
All manuals and user guides at all-guides.com
Press the Mode/Enter button
several times until the respective
parameter is displayed.
Press the Set button and keep
it pressed. The current parameter
value is indicated for 5s,
then the value is increased*
(incremental by pressing briefly or
scrolling by holding pressed).
Press the Mode/Enter button
briefly (= acknowledgement).
The parameter is displayed again,
the set parameter value
becomes effective.