Operation And Functions - Vieta Home VH-CD060 Bedienungsanleitung

CONNECTION WITH AMPLIFIER
Audio connection layout
This page only contains suggestions for connection of your VH-CD060BK/SL.
Note that the accessories in the pictures on this page are not included in the supply.
26
All manuals and user guides at all-guides.com
CD/MP3 Player

OPERATION AND FUNCTIONS

On, Off and standby
1. Turn on and off the unit by pressing the mains switch.
2. Press the standby button on the remote control to
switch into standby mode and power on again.
3. If you wish to turn off the unit to avoid any power
consumption, you must press the mains switch.
3. Protect the environment and turn off the unit after used.
Load a disc
If you want to play a disc, you must load it. You do that
by pressing the eject button on the remote control or
on the front panel of the CD player.
When the disc has been read, the display will show the
number of tracks on the disc and the total playback
time.
If there is not disc in the tray, the message "NO DISC"
will be displayed. If the unit has trouble reading a disc,
you must check if the disc is clean and free from dirt. If
the disc can still not be played, you must contact your
dealer.
Play/Pause
Press the PLAY/PAUSE button on the remote control or
on the front panel once to start playback; the counter
on the left side of the display will start to count upward.
Press the PLAY/PAUSE button once more to stop
playback; the counter in the display will start to blink.
To continue playback, press the PLAY/PAUSE button
again.
27