Connection With Amplifier; Audio Connection Layout; Operation And Functions; On, Off And Standby - Vieta Home VH-CD035BK Gerätehandbuch

Connection with Amplifier

Audio connection layout

This page only contains suggestions for connection of your VH-CD035.
Note: that the accessories in the pictures on this page are not included in the supply.
26

Operation and Functions

On, Off and Standby

1. Turn on and off the unit by
pressing the mains switch.
2. Press the standby button on
the remote control to switch
into standby mode and power
on again.
3. If you wish to turn off
the unit to avoid any power
consumption, you must press
the mains switch.
4. Protect the environment
and turn off the unit after use.

Load a disc

If you want to play a disc, you must load it. You do that
by pressing the eject button on the remote control or
on the front panel of the CD player.
When the disc has been read, the display will show the
number of tracks on the disc and the total playback
time.
If there is not disc in the tray, the message "NO DISC"
will be displayed. If the unit has trouble reading a disc,
you must check if the disc is clean and free from dirt.
If the disc can still not be played, you must contact your
dealer.

Play / Pause

Press the PLAY/PAUSE button on the remote control or
on the front panel once to start playback; the counter
on the left side of the display will start to count upward.
CD Player
Press the PLAY/PAUSE button once more to stop
playback; the counter in the display will start to blink.
To continue playback, press the PLAY/PAUSE button
again.
Stop
To stop playback completely, press the STOP button
once.
The display will display all the number of tracks on the
disc and the total playback time.
Skip: Previous / Next
When a CD track is being played it is possible to switch
to the previous track or to the next track.
If you want to continue to the next track, you must
press the >>l button on the remote control or on the
front panel once. If you want to move on several tracks,
you must press >>I until you reach the track desired.
If you wish to go back to one of the previous tracks, you
must use the same procedure but not the same button.
Use the >>I button instead.
Search: Forward and rewind
If you wish to search forward, depress the >> button
on the remote until you get to that part of the track that
you wish to hear, and then press play. You will see that
the time counter in the display counts up very quickly.
If you wish to search backward, use the same
procedure as when you search forward, but use the <<
button instead.
Random
It is possible to select random play by pressing the
RANDOM button on the remote control or the front
panel. The CD tracks will be played in random order.
The dash between the first and second number from
the left starts to flash when this functiopn has been
activated.
It is possible to activate random play both in stop mode
and during playback.
Press the RANDOM button again if you wish to
deactivate random play.
Note: When you press SKIP buttons ( l<< or >>l) during
random play, it will not be possible to select the next
track but any other track.
27
ENGLISH