Preparation For Use - eta Crema Bedienungsanleitung

– Caution: Do not use the appliance with a program, time switch or any other part that turns
the appliance on automatically as there is a risk of fire if the appliance is not covered
or placed properly.
– WARNING: There is a risk of injury in case of incorrect use (not in accordance with
the manual) of the appliance.
– All text in other languages and pictures shown on the packaging, or the product itself,
are translated and explained at the end of this language mutation.
– The manufacturer is not responsible for damage caused by improper use of the appliance
and the accessories (e.g. food deterioration, fire) and its guarantee for the appliance
does not apply in situations when the safety warnings above are not complied with.
II. DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (Fig. 1)
A – drive unit
A1 – speed selector
A2 – TURBO button
A3 – holes for connecting the accessories B, C
B – whipping beaters
C – kneading hooks
D – immersion blender (only ETA 1049)
1
A3
III. PREPARATION FOR USE
Remove all the packing material and take out the beater with the accessories. Remove
all possible adhesion foils, stick–on labels or paper from the appliance. Before the first use,
wash the parts that will be in contact with food in hot water with a detergent, rinse them
thoroughly with clean water and wipe till dry, or let them dry. Plug the power cord connector
A5 to an electric socket.
A1
A2
A4
A4 – handle
A5 – power cord
A6 – cover of the blender drive
(only ETA 1049)
A5
A6
17 / 41
D
B C
GB