Lightair CellFlow Pro CFPro600 Originalanleitung Seite 12

ENGLISH
5.
• Plug the furnished connecting cable to the
panel on the back of the product
• Connect with the power supply in the wall
socket
7.
• Put the batteries into the remote control
• From now and on, remote control with
functions can be used
9.
• Turn on the air cleaner with the push of a
button On/Off (the lower one)
• Light-emitting diode (LED) on the remote
control will blink red
• The fan should start working at low speed
• Change the fan speed with the upper button
• The air cleaner can also be controlled on the
product's operation panel on the back side,
refer to picture 5.
12
6.
• Flip the main power switch from 0 to 1
• The product is now put in standby mode and
ready to be used
8.
• Remote control handset front cover with
function keys
• Always point the remote control towards the
product when activating buttons
10.
• Light-emitting diode (LED) indicator from
the front of the product (from left)
• Red diode: Stand by
• No Diode = IR receiver
• Green diode: Low speed fan
• Green diode: Average
• Green Diode: High