Battery Status Indication; Charging Status Indication - WUBEN TO40R Bedienungsanleitung

Output selections: When the light is on, single click on
2
switch to cycle through Eco-Low-Med-High-Turbo. This
light has output memory function, every time it
memorizes the output level on which it is turned off, it
will be turned on the memorized output level.
Instant Turbo: When the light is off, press and hold
3
switch to activate Turbo, release to turn it off. When the
light is on, press and hold
and constant on, and click to turn it off.
Instant Strobe: When the light is off, press and hold
4
switch to activate Strobe, release to turn it off. When
the light is on, press and hold
and click to return to the previous output level.
SOS: When the light is on, press and hold
5
activate Strobe and then SOS after 3 seconds, single click
to return to the previous output level.
Lockout and unlock: When the light is off, press and hold
6
both switch and
indicate the lockout, press and hold again until it blinks
again to unlock the light.

4. Battery status indication

Blue light constant on
Red light constant on
Red light flashes

5. Charging status indication

switch)
Plug the Micro-USB charging cable to charge the flashlight.
Please unplug the charging cable after charging finished. It
takes about 4 hours to fully charge it. (5V/1A)
switch to activate Turbo
switch, main light will blink to
(off after 5s)
- 05 - - 05 -
switch to activate Strobe,
switch to
(indicator beneath
Battery power 100%~31%
Battery power 30%~15%
Battery power under 15%
(indicator beneath
E
N
switch)