Nacon Revolution Pro Controller Bedienungsanleitung Seite 5

n EN
2. MODE 1: PRO CONTROL MODE
In this mode the controller supports the following features:
- Motion sensors
- Touch pad
- Dual vibrations
- 3.5mm headset jack
- PS, SHARE & OPTIONS buttons
- L1 & R1 shoulder buttons
- L2 & R2 analogue triggers
- Left analogue joystick with L3 button
- Right analogue joystick with R3 button
- 8-way direction pad
- d, a, s, f
NOTE: The REVOLUTION Pro Controller does not feature a built-in speaker or light bar.
3. MODE 2: ADVANCED MODE (via PC companion app)
In this mode, in addition to supporting all the Pro Control mode features you can also personalise your
settings. To do so you will need to download, and install, the PC companion app, which is compatible
with Windows 7/8/10 operating systems. It can be downloaded at the following link:
®
http://nacongaming.com/revolution-pro-controller-software
Once you have downloaded the PC companion app and launched it, follow the onscreen instructions
for the installation.
After installing the PC companion app you will be able to do the following:
- Adjust the settings of the right analogue stick
- Re-map almost all buttons (excluding "PS" button)
- Map macros to the 4x shortcut buttons
- Create and load up to 4x custom profiles onto your controller,
then switch between them during game play
- Adjust the dead-band on the L2 and R2 triggers
- Independently adjust the vibration intensity on the left and right hand grips
- Adjust the backlight around the right analogue stick
For more information go to section 4.
PC companion app:
NOTE: The controller comes with
4x pre-loaded custom profiles
to suit a range of games:
- Neutral (Right stick like
Pro Control Mode, L1/R1 & L2/R2
mapped to back buttons
- FPS (Right stick more responsive)
- FPS Pro (Increased responsiveness)
- Arcade (immediate stick response)
To access all the features of
the "Advanced mode" you will
require the PC companion app.
4. PC COMPANION APP
The main screen (Image 4) of the PC companion app will allow you to switch between the different settings.
1. PROFILE BAR: switch between the settings of the profiles from 1 to 4.
The GENERAL SETTINGS tab allows you to set some settings applied on all the profiles (Backlights, Vibration etc.).
You will also have the possibility to check if new firmware is available.
2. PROFILE MANAGEMENT:
a. Controller Profiles: displays the profiles you already have in your controller.
b. My Profiles: displays the profiles you have created and saved on your computer.
c. Download: displays the available profiles that you can download from the NACON website.
d. Nacon Profiles: displays the profiles you have downloaded from the NACON website.
3. CREATE YOUR PROFILE: by pressing the "NEW" button you will create a new profile
which is stored on your computer.
4. FEATURE SETTINGS: configure different settings of your controller:
a. Right Joystick: set the response curve of the right analogue stick and also the static dead zone.
b. Mapping: this feature allows you to remap buttons on the controller and assign macros
to the 4x shortcut buttons.
c. Triggers: personalise the response of the triggers.
d. Macros: create macros - sequences of buttons or actions that you can assign to a single button press.
5. QUICK SETTINGS and ACTIVATE PROFILES:
a. The Quick settings are there to allow a quick configuration of your controller.
b. Activate Profiles: this button will load the 4x current profiles used on the PC companion app
into your controller.
To switch between the profiles, (in Advanced mode), press the "Profile" button on the back of the controller.
The "Profile" LED will light up to show which profile is selected.
1 2
Image 4
EN n
3
4
5