Troubleshooting Table - hanseatic EC1749 Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put your own
and future users' lives in danger. Only authorised specialists are allowed to carry out this repair
work.
Problem
The mains plug is connected but
the soleplate (5) is cold.
No steam is emitted from the
soleplate.
The steam shot button (14) is
not working.
The ironing result is poor.
The garment has discoloured.
Limescale/impurities are
escaping from the holes in the
soleplate.
Troubleshooting table
Possible cause
The socket has no power.
The temperature is set to the
lowest setting.
Not enough water in the water
tank.
The temperature is set too low.
Not enough water in the water
tank.
The temperature is set too low.
The function is being used for
the first time.
The heat setting is incorrect.
The temperature setting was too
high.
You have filled the water tank
with very hard water.
Page EN-17
Solutions, tips
Check the fuse. Use another
socket.
Select a higher temperature.
Fill the water tank up to the
"MAX" mark.
Select the highest heat setting.
Refill the water tank (see
"Intended use" on page EN-3)
Select a higher heat setting.
Push the steam shot button
several times in a row until
steam is emitted.
Use the heat setting required for
the material to be ironed.
Ensure that the heat
setting corresponds to the
specifications on the care label.
Test an inconspicuous area on
the inside seam.
Use the self-clean feature