Safety Precautions; Place Of Installation - Palazzetti Ecomonoblocco WT-Serie Installationshandbuch

The following paragraphs contain some guidelines
to be followed to obtain the maximum efficiency of
the product purchased and to ensure safe operation.
The following instructions are nevertheless subject to
compliance with any national, regional and municipal
laws and regulations in force in the country where the
product is installed.

4.2 Safety Precautions

The user must comply with all local, national
and European safety regulations.
The appliance must be installed on floors with
adequate load bearing capacity.
If the floor is not of sufficient load-bearing
capacity, it is advisable to use a load distribution
plate of adequate dimensions.
The operations for assembly and disassembly of the
appliance are reserved for specialist technicians only.
It is recommended to make sure about their
qualifications and their actual capacity.
*For Italy, these technicians must be in
possession of the letter "C" issued by the
Chamber of Commerce on the basis of Italian
Ministerial Decree 37/08.
The person in charge of the installation, before starting
assembling or disassembling the machine, must
comply with the safety precautions required by law
and in particular to:
- must not operate in adverse working conditions;
- must operate in perfect psychophysical conditions
and must check that the personal protective equipment
is intact and functioning perfectly;
- must wear safety gloves and shoes;
- must make sure that the area involved in the
assembly/dismantling phases is free from obstacles.

4.3 Place of installation

For the minimum distances expressed in cm that must
be respected in the positioning of the product with
respect to flammable materials and objects, refer to
the product manual delivered that accompanies the
appliance.
Floors made of flammable material such as wood,
parquet, linoleum, laminate or covered with carpets
must be protected by a fireproof base under the stove
that also protects the front part from the possible falling
of combustion residues during cleaning.
The manufacturer declines all responsibility for
any variations in the characteristics of the material
constituting the floor under the protection.
Ensure the presence of a technical compartment that
allows access to tools for any maintenance works.
Please remember to respect the minimum distance
from flammable materials stated on the id plate of the
tubes used to manufacture the fireplace.
The appliance is provided with wheels for
28
positioning, paying particular attention to
adequately protect the wood or parquet floors
in order to prevent the weight of the appliance
to damage them during movement.
004778150 - 18/08/2020
Product images are purely indicative