General Introduction; Intended Use; Purpose And Content Of The Manual; Preservation Of The Manual - Palazzetti Ecomonoblocco WT-Serie Installationshandbuch

1

General introduction

Palazzetti heating appliances are manufactured
and tested in accordance with the safety
requirements set forth in the reference
European directives.
Even partial printing, translation and
reproduction of this manual are bound by
the authorisation from Palazzetti. Technical
information, graphical representations and
specifications in this manual may not be
disclosed to third parties.
Do not operate if all the information given in
the manual are not well understood; if in doubt
always ask the advice or the intervention of
Palazzetti specialized personnel.
Palazzetti reserves the right to change
specifications and technical and/or functional
characteristics of the product at any time
without prior notice.
1.1 Symbols
In this manual the points of major importance
are highlighted by the following symbols:
Indication: Indications concerning the correct
use of the product and the responsibility of the
designated persons.
Attention: The point in which a note of
particular importance is expressed.
Danger: Expresses an important note of
behaviour for the prevention of injuries or
damage to properties.

1.2 Intended use

Palazzetti Ecomonoblocco model series WT
is an appliance which must be installed and
used only indoor, suitable for combustion of
wood logs for residential heating, consisting
in a structure completely made of metal, with
furnace closed by a ceramic glass.
The appliance must only be used with the door
of the furnace closed.
The appliance is not intended to be used
by children under the age of 8 years and
by persons with reduced physical, sensory
or mental capacity, or without experience
and knowledge, unless they have received
instructions relating to the safe use of the
appliance and they are under the surveillance
of a person responsible for their safety.
The destination of use indicated is valid only
for appliances in full structural, mechanical and
engineering efficiency.

1.3 Purpose and content of the manual

The purpose of the manual is to provide
the fundamental and basic rules for correct
installation of the product.
24
The strict observance of what is described
in it guarantees a high level of safety and
productivity of the fireplace.

1.4 Preservation of the manual

Preservation and consultation
This manual must be carefully stored and must
be available at all times for consultation, both
on the part of the user that the installation and
maintenance personnel.
The installation manual is an integral part of
the appliance.
Deterioration or loss
If necessary, request a further copy from
Palazzetti.
Sale of the appliance
In the event of transferring the appliance the
user is obliged to deliver even this manual to
the new owner.
1.5 Update of this manual
This manual reflects the state of the art at the
time of placing the product on the market.
The products already on the market with the
relevant technical documentation, will not
be considered by Palazzetti as deficient or
inadequate due to possible modifications,
adjustments or application of new technologies
on newly marketed products.
1.6 Overview
The instructions in this manual apply as
general rules; it is still necessary to comply
with all the rules laid down by the local, national
and European legislation in force in the country
where the appliance is installed.
Information
In case of exchange of information with the
Manufacturer of the product please refer to the
serial number and to the identification data on
the serial number plate of the product.
Extraordinary maintenance
The extraordinary maintenance operations
must be performed by qualified personnel
authorized to intervene on the product referred
to in this manual.
Responsibility for the works of installation
Palazzetti cannot be considered responsible
for the works carried out for installation of the
product; it is and remains the responsibility of
the installer, who must check the flue, the air
intake and the correctness of the proposed
installation solutions.
004778150 - 18/08/2020