Swarovski Optik tM 35 Bedienungsanleitung Seite 16

3.5 HAND-HELD AND CLIP-ON MODE
4x
2s
SL on
Press the mode button (5) for 2 seconds. This toggles
the display between 1x (clip-on) and 4x (hand-held)
mode.
In clip-on mode, only the central part of the display
is used (1x magnification). In hand-held mode, the
complete display is used (4x magnification) The field
of view remains the same in hand-held and clip-on
modes.
3.6 SWAROLIGHT
The tM 35 has a tilt sensor. The tilt sensor works both
when used as a thermal imaging clip-on device and
as a thermal imaging hand-held device.
For use as a thermal imaging hand-held device
OFF
ON
ON
OFF
30
tM 35 / EN tM 35 / DE
1x
SL on 1x
4x
ON
OFF
OFF
For use as a thermal imaging clip-on device
OFF
ON
ON
OFF
Pressing the plus (3) and minus
SL ON/OFF
(4) buttons simultaneously for 3
seconds switches this function eit-
her on or off. The tilt sensor detects
3s
whether the device is in a shooting
position as a thermal imaging clip-
on device.
The tM 35 switches off if the tilt
angle is greater than 70° (upward or downward),
for example, if you stand the rifle up vertically. The
tM 35 also switches off if the lateral tilt is greater
than 30°, for example, if you rest the rifle on your
legs.
When you return the rifle to the shooting position, the
tM 35 automatically switches on.
After one hour without operation, the device switches
off completely.
3.7 AUTOMATIC BRIGHTNESS ADJUSTMENT
The tM 35 has an automatic brightness adjustment
feature that automatically adapts the brightness of
the display when the device is switched on or when
activated by SWAROLIGHT. The tM 35 recognizes
whether you are using the device during the day,
in twilight, or at night. The brightness of the display
tM 35 / EN tM 35 / DE
ON
OFF
OFF
31