Werbung
Verfügbare Sprachen
Verfügbare Sprachen
18813 Stacker for 18810 »Omega«
- For a second keyboard or laptop
- Max. weight capacity of the upper support arms: 25 kg
- 10 stage height adjustment
- Width of the support arms adjustable
- 5 tilt positions (0°-5°-10°-15°-20°)
- Dimensions: height: 262-375 mm, width: 210-810 mm, depth: 400 mm below, 330 mm above
Thank you for choosing this product. This instruction manual informs you about the important steps to set up and handle the product.
We recommend to keep the manual in a separate place for a possible later use.
SAFETY NOTES
- Ensure the locking knobs ares tightened
- Ensure the stand is placed on level ground
- Ensure the support arms are always at the
-
same height and choose a tilt position
- position the rubber discs 6 so that
- the keyboard does not wobble or move on the stacker
ASSEMBLY INSTRUCTIONS
COMPONENTS
1 Upper support arms (2x)
2 L arms (2x)
3 Locking knobs (2x)
4 washers (2x)
5 Fixing nuts M6 (2x)
6 Protective rubber discs, self-adhesive (8x)
7 Carriage bolts M6 x 60 mm (2x)
8 Fixing nuts M6 (2x)
9 Carriage bolts M5 x 40 mm (2x)
ASSEMBLY
Preparation of the 18810 Table-Style
Keyboard Stand »Omega«
(see section on USES)
A Short add-ons (e.g. a laptop):
A
- Do not remove support arms 11 as
A -
they support the keyboard.
B Wider add-ons (e.g. a second
B
keyboard)
B
- It may make sense to disassemble
B -
the support arms 11 if they are
B -
superfluous.
B
- If so, remove the carriage bolts 10,
B -
washers 13 and fixing nuts 12.
To attach the Stacker 18813 to the Table-Style Keyboard Stand
- Decide on the distance between the support arms.
- Attach the L arms 2 to the cross bar using the carriage bolts 7, washers 4 and fixing nuts 5
- Slot the first upper support arm 1 in an L arm 2.
- Select the required height and secure with the locking knob 3.
- Attach the second supporting arm in the same way.
-
NOTE: The support arms must be the same height.
- Attach the protective rubber discs at suitable positions for the keyboard.
All manuals and user guides at all-guides.com
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18813-011-55 Rev.04 03-80-261-00 10/12
Werbung
