Crossover Mounting - Kicker KSS269 Benutzerhandbuch

Crossover Mounting

Mount the crossover in a location that is easy to
access for wiring. Make sure that the crossover
will not be exposed to water. The bottom of the car
door is not a good location. If you must mount the
crossover in the car door, exercise caution as water
can accumulate in the bottom of the door. Keep the
crossover high in the door and shielded from water.
tweeter mounting hole
to tweeter lead wires
woofer mounting hole
If factory speaker wiring is not available in your desired
location, it may be necessary to run speaker wire
through the door jamb. The speaker wire should be
kept away from sharp edges and avoid the possibility
of getting pinched by the door. An existing grommet
in the door jamb is the ideal place to run the speaker
wire. If the factory hole and grommet do not exist
or are inaccessible, you must drill a hole to run the
English
to woofer
terminals
rubber
grommets
door jamb
from
amplifier or
source unit
7