Herunterladen Inhalt Inhalt Diese Seite drucken

Linea 2000 Domo DO1070DV Gebrauchsanleitung Seite 16

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23
·
Installez la poignée.
·
Après installation, laissez l'appareil reposer pendant 24 heures avant de le mettre sous tension. Le gaz
réfrigérant pourra ainsi se stabiliser.
·
Laissez l'appareil fonctionner durant 12 heures sans alimentation électrique afin que le boîtier puisse
refroidir à la température appropriée.
·
La classe climatique indique la température ambiante minimale et maximale pour le bon
fonctionnement d'un appareil. Vous trouverez la classe climatique sur la plaque signalétique au dos de
l'appareil.
·
SN : Subnormal : température ambiante de 10 °C à 32 °C
·
N : Normal : température ambiante de 16 °C à 32 °C
·
ST : Subtropical : température ambiante de 16 °C à 38 °C
·
T : Tropicale : température ambiante de 16 °C à 43 °C
CHANGEMENT DU SENS D'OUVERTURE DE LA PORTE
oor
La porte du congélateur est réversible. Si vous avez besoin de monter la porte du congélateur dans l'autre
oor
sens, il est recommandé d'appeler votre agent d'entretien agréé pour effectuer cette inversion, ou de
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
demander à un technicien.
s unplugged and empty.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Avant d'inverser le sens d'ouverture de la porte, vous devez vous assurer que l'appareil est débranché et
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
slip during the door reversing process.
s unplugged and empty.
vide.
d must be saved to do the reinstallation of the door.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
it flat as this may damage the coolant system.
slip during the door reversing process.
2 people handle the unit during assembly.
d must be saved to do the reinstallation of the door.
1.
Retirez les deux vis situées à l'arrière du couvercle supérieur.
it flat as this may damage the coolant system.
2 people handle the unit during assembly.
ews at rear side of top cover.
ews at rear side of top cover.
2.
Retirez le couvercle supérieur du congélateur.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
16
DO1070DV
unscrew
unscrew
16

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis