Information; Service Information; Checking H/W & S/W Information; Remote Control Unit (Rcu) Setup - MK Digital XP1000 Bedienungsanleitung

5.3 Information

5.3.1 Service Information

5.3.2 Checking H/W & S/W Information

6. REMOTE CONTROL UNIT (RCU) SETUP

In order to use the universal remote control feature, you must correctly setup for TV control. This section explains how to setup the
universal remote control. For the setting up, we have presented the list of supported TV codes.

6.1 Setting up as a TV Remote Control

When you press TV button, supplied remote control unit is working as TV remote controller. To do this, you have to setup with
corresponding TV codes. Valid buttons at TV mode are Power, Volume +/-, Mute, TV (for switching sources), Menu, numeric keys (0~9),
directional buttons (up/down/left/right) and colour buttons (Red/Green/Yellow/Blue).

6.1.1 4-digit Setting Method

1. Power on TV using TV power button or TV remote control.
From this step all further remote controls should be done using the universal remote control and the remote control should be
directed towards the TV.
2. Press and hold the TV button more than 3 seconds. Then, two LED lamps from TV and STB buttons are flickering. Release the TV
button. Then, LED lamp from the TV button is flickering.
3. Enter 4 digits with reference to the "TV Brand List" section. If 4-digit code is in the list, LED lamp from the TV button will flicker 3
times and corresponding 4-digit code is stored. Otherwise, TV LED lamp will turn off and 4-digit code is not stored.
NOTE: In case that the POWER (
above procedure or follow "Smart Scan Method" .
) button for TV is working but other important keys are not working, then repeat the
26
[ : MENU > Information > Service]
In this menu, you can see the service information of the
current channel such as service name, service provider and
video format & size.
[ : MENU > Information > About]
This menu is for you to check the current system of your
XP1000. You can see the following information:
1 S/W version
2 Detected NIMs for Tuner A
3 Detected HDD