Power On/Off; First Time Installation (Using Wizard); Video Input Selection; Video Mode (Resolution) Selection - MK Digital XP1000 Bedienungsanleitung

2.3 Power On/Off

[ : Press Power key / Press MENU > Select Standby/Reset]
There are several ways to turn your XP1000 ON or OFF.
* Complete Power Shutdown
There is a Power Switch in the rear panel and once it is ON, you do not need to turn it on or off each time. It takes a longer time to
boot the system if you turned it off by this switch.
* Standby Mode
POWER key is normally used to turn the power of XP1000 on or off. If you press POWER, it instantly switches your XP1000 off or on.
In this mode, the system is not completely shut down and thus it takes a shorter time to turn it on and off.
* Deep Standby Mode [
Deep Standby is used to reduce the standby power consumption. XP1000 is designed to be energy efficient and to guarantee the
power consumption to be under 1W in the deep standby mode.

3. FIRST TIME INSTALLATION (USING WIZARD)

When you turn on XP1000 for the first time after purchase, an installation wizard will begin step by step.
NOTE: OK key is used for confirmation and turns to the next step. Press EXIT key to return to the previous page.

3.1 Video Input Selection

3.3 Language Selection

: Menu > Standby/Restart > Deep Standby]
3.2 Video Mode (Resolution)
Selection
XP1000 provides various languages and here you can
choose the main language for your XP1000 . Use UP/DOWN
key to scroll up and down to find the language you want.
11