WIKA MTF-1 Einbauanleitung Seite 13

8. Dismounting, return and disposal
8.2 Return
Strictly observe the following when shipping the pressure sensor module:
All pressure sensor modules delivered to WIKA must be free from any kind of hazardous
substances (acids, bases, solutions, etc.) and must therefore be cleaned before being
returned.
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media on the dismounted pressure sensor module can result in a
risk to persons, the environment and equipment.
▶
With hazardous substances, include the material safety data sheet for
the corresponding medium.
▶
Clean the pressure sensor module
When returning the pressure sensor module, use the original packaging or a suitable
transport packaging.
To avoid damage:
1. Wrap the pressure sensor module in an antistatic plastic film.
2. Place the pressure sensor module, along with the shock-absorbent material, in the
packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our
local website.
8.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
Do not dispose of with household waste. Ensure a proper disposal in
accordance with national regulations.
WIKA installation instructions, model MTF-1
EN
13