oneConcept MCH-2 V2 Bedienungsanleitung Seite 18

EN
18
FILLING
1. Open lock
3. Fill water into the tank
2. Pull out the water tank
OPERATION
• When using the appliance, make sure that it is on a flat and hard surface. If
it is placed on a slope or incline, it may be damaged.
• Plug the power plug into the mains socket. Make sure that the mains plug
is firmly inserted into the socket.
• Turn the TIMER KNOB to the ON position.
• Press the LOW, MEDIUM or HIGH button to set the desired fan power.
• If you want to increase the area that the fan reaches, press the VANE
button. The corresponding indicator lamp lights up and the swivel blades
slowly move back and forth. If you want to stop the swivel operation,
press the VANE button again , The control lamp goes out. If you slide the
horizontal slats up or down, you can change the wind direction manually.
• With the TIMER BUTTON you can set a maximum operating time of up to
120 minutes, after which the appliance switches off automatically.
• Press the OFF button to switch off the device. For safety, disconnect the
power plug from the mains.
4. Add ice or ice pack