Foscam Indoor QHD IP Security Camera Benutzerhandbuch Seite 8

5. In "WiFi connection", select "Ready" and enter your WiFi's password and tap
"Confirm", afterwards tap the "Configure WiFi connection" button.
Select "WiFi connection"
6. Please scan the QR code on the phone screen with camera, then you will hear a
voice prompt say "WiFi connecting". Select the checkbox and tap "Next".
Place the QR code directly in front
of the camera
Tips: Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in)
away, and if you encounter difficulties you can try to move the screen slowly around
10 – 15cm (3.94 – 5.9in).
7. Wait a few second until the camera notifies you that the "Wireless connection
seceded", which means your camera has connected to your WiFi successfully.
After, you can set the camera name and tap "Save" in "Set name" interface.
Enter your WiFi's password
and tap "Confirm"
Tick the checkbox
and tap "Next"
8