Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.
Installation
-
After cutting off the small cylinder (1) on the bracket, the tamper proof locking tab function
is activated.
-
Attach (2) the wall bracket to the wall or ceiling.
-
Fit the alarm onto the wall bracket (3).
-
Press firmly against the wall plate and slide (4) the device down.
-
Tamper proof locking tab will click into place.
5.
Activation
-
Press and hold the cover, this is the TEST / SILENCE button, for 5 seconds.
-
All indicators will flash, the sounder will beep and the device will enter a warm-up state.
-
The alarm has been activated.
-
The green POWER light blinks once per second.
-
After 60 seconds, the green POWER light blinks once every minute.
-
The equipment is working normally.
6.
Removal
-
Use a small screwdriver to press on
the tamper proof locking tab (1)
located at the right edge of the device
-
Slide the device to the up (2) to
remove it from the wall mounting
plate.
-
When removing the device from the
wall mounting plate, the alarm keeps
working.
- 3 -
Werbung
Inhaltsverzeichnis
