Safety Notes - ophelis CN-Serie Technische Dokumentation/Betriebsanleitung

Safety Notes

∙ Make sure the electric supply mains has the required oper-
ating voltage before connecting the desk.
∙ Do not route cables and wires where they might be
crushed, stretched or kinked!
∙ Make sure there are no other items (e.g., furniture) or
parts of the human body in the lifting area that could be
trapped when activating the motor.
∙ Danger of crushing during resets (anti-collision device is
inactive)!
∙ The operation of the desk is reserved for adults who are
familiar with the procedure. It is not suitable for children.
∙ Do not use to lift people.
∙ Not authorised for use as a lifting device for materials.
∙ When using electrical or electronic devices, such as
mon¬itors, computers or telephones, make sure cables
are of a sufficient length (take lifting height into consider-
ation) and place them in a safe location where they do not
pose a tripping hazard. Use the provided cable channels.
∙ Keep a minimum distance of 25 mm from adjacent objects
to avoid pinching and shearing points!
∙ Stop using the table at once in the event of a malfunc¬-
tion, smoke or odour development, unusual sounds or
visible exterior damage. Disconnect the main power plug!
20 ophelis Technical Documentation and Operating Instructions for CN Series Sitting-Standing Tables
All manuals and user guides at all-guides.com
∙ Do not open the casing of the lifting columns or the
control unit! The unauthorised opening of components
and incorrect repairs may result in hazards to the user,
damage to components and voiding of the warranty.
∙ Electrical devices must be opened and repaired by the
manufacturer's personnel or its authorised customer
service technicians only!
∙ After 2 minutes of permanent use, the control unit will
switch off for 18 minutes in order to protect the motor
from overheating.
∙ To avoid the risk of electric shock and short circuits, do
not allow liquids to penetrate into the lifting columns or
the control unit!
∙ Do not modify components, as they are perfectly
syn¬chronised with respect to both function (technical
design) and size.
∙ Modifications may result in hazards or damage and are
therefore excluded from liability and warranty claims.
∙ Do not exceed load values.
∙ Our guarantee only applies if the device is used as
intended.