ophelis CN-Serie Technische Dokumentation/Betriebsanleitung Seite 18

First Aid Checklist
for electromotive tables
CHECK THE PLUG CONNECTIONS IN THE CONTROL UNIT (IN THE HORIZONTAL CABLE CHANNEL AT THE UNDER-
NEATH OF THE TABLE TOP)
Is the appliance connected to the power outlet?
Is electricity on the socket?
Is the power supply (3-pole) tightly plugged into the control unit?
For tables with 2 lifting columns: are the slots M1 and M2 in the control unit occupied? Check if they are
tightly plugged.
For tables with 3 lifting columns: are all slots (M1 – M3) in the control unit occupied? Check if they are
tightly plugged.
Is the plug (blue) for the switch connected to the slot HS of the control unit?
CHECK THE FUNCTION OF THE SWITCH
A) SWITCH WITHOUT DISPLAY
Is the pressure-point from press and release visible?
B) SWITCH WITH DISPLAY
Does the display shine?
Does the display change, when pressing a key?
STABLE POSITION
Do the height adjusters (3 per foot) have equal ground contact?
Paper test: Put a piece of paper underneath all 3 height adjusters of the table foot. It should be possible
to pull out the paper with equal force.
18 ophelis Technical Documentation and Operating Instructions for CN Series Sitting-Standing Tables
All manuals and user guides at all-guides.com
checked