ophelis CN-Serie Technische Dokumentation/Betriebsanleitung Seite 19

MÖGLICHE STÖRUNGEN UND DEREN BEHEBUNG
Potential cause
MOTORS ONLY MOVE IN ONE DIRECTION
Power failure during move
TABLE OVERHEATED (FOR MEMORY FUNCTION – THE DISPLAY SHOWS HOT)
The overheating protection was activated
due to overheating
If a problem cannot be fixed with the measures listed above or if a problem occurs repeatedly, please fill out the first-aid
checklist and send it to our customer service department: service@ophelis.de. They will contact you as soon as possible
The following information you will find on the lable below the table top:
Order confirmation number:
Position:
Item number:
Description of the malfunction:
Date, Signature
You can find the checklist as well as download on our homepage under the category of the tables CN Series.
All manuals and user guides at all-guides.com
Error handling
Carry out a manual reset
Wait 18 minutes for the motor control unit to cool off or for
HOT to disappear from the Display; the desk will then be
ready for operation again
ophelis Technical Documentation and Operating Instructions for CN Series Sitting-Standing Workplaces
checked
19