Mounting - Lupine Piko R Bedienungsanleitung

Mounting Quick Release
All manuals and user guides at all-guides.com
For mounting the Piko R on a handlebar diff erent For mounting the Piko R on a handlebar diff erent
CNC Quick Release mounts are available. CNC Quick Release mounts are available.
Have a look at www.lupine.de
For mounting, please fi rst loosen the screws on the helmet
mount/headband. Only one screw but both o-rings are requi-
red for mounting the Piko R on the bar.

Mounting:

1. Put the screw with o-ring through the hole of the handlebar
mount.
2. Put the second black o-ring onto the tip of the screw. The
order of o-ring, screw, o-ring, handlebar mount, lamp must be
strictly adhered to as shown in the picture in order to ensure
fl awless functionality.
3. Tighten the screw slightly fi rst, then securely. Cover the open
thread with the included plug.
4. Put the clamp around the handle bar and close it.
Piko R 2 9