Lupine PIKO R Bedienungsanleitung Seite 25

The switch on the lamphead as well as the Bluetooth remote are equipped with a
RGB-LED to show information about the dim level and the remaining battery capacity.
blue LED lighting:
green LED lighting:
red LED lighting:
red LED fl ashing +
light fl ashing ones:
blue + red LED
fl ashing in turn +
light fl ashing 5 times:
blue + red LED
fl ashing in turn:
All manuals and user guides at all-guides.com
Lamp is on high beam (15W).
Lamp is on a lower beam.
1. Battery Warning, low capacity remaining.
The red LED is lighting.
You can adjust the timing of the battery warning,
see progamming on next page.
2. Battery Warning, very low capacity remaining.
The red LED is fl ashing and Piko fl ashing ones, too.
Warning!
The red and blue LED fl ashing in turn, the lamp fl ashes 30
Stop immediately! The light will be switched off .
times.
After switching the light on again, reserve power at a low
beam is available. Depending on the age of the battery, some
more minutes of light are provided.
completely discharged, the light will be switched off automati-
cally. So slow down!
Note:
The burn time remaining after the red LED is illuminated
depends on the total battery capacity, the ambient tempera-
ture and the battery's age.
Meaning of LED colors
When reserve power is
Piko R 2 1