Wilfa MOIST C Anleitung Seite 15

The ambient Humidifier is working in
humidity is too CONTINUOUS MODE.
high.
The humidity target is
too high.
Room is not well-
ventilated.
Excess water tank has
spilled while filling the
water tank or replacing
the water tank back
onto the base.
There is The room temperature
condensation in is too low.
the room.
The mist suddenly Programmed timer
stops coming out. period has run out.
The water shortage
indicator is on.
The target humidity
level is reached.
Incorrect humidity Room is larger than the
level is being effective range of the
displayed. humidifier.
Moisture has built up
inside of the humidity
sensor.
The nozzle is facing the
direction of the humidity
sensor.
Humidity sensor is
broken of defective.
MOIST C · HU-430CW
Change the mode.
Select a lower %RH target.
Open a window to ensure
proper air flow for your
humidifier or move the
humidifier to a more well-
ventilated room.
Wipe off excess water from the
top and bottom of the base
before replacing the water
tank.
Heat the room up.
Turn humidifier on.
Refill water tank.
Turn the humidifier off, or
select a higher humidity level.
Move the humidifier to a room
which is with suitable room
size.
Turn off the humidifier and
allow the humidity sensor
to completely air dry before
resuming use.
Turn the nozzle so that it is
facing away from the humidity
sensor.
Contact Customer Support.
13
EN