Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING: if you are unable to properly adjust the helmet according to the instructions
in the manual, do not use it. Please replace it with a diff erent size or model.
CARING FOR THE HELMET
5
The helmet should be cleaned regularly with a damp cloth in a solution of soap and
water. The use of chemical solvents, paints, or stickers that are not supplied with
the helmet can damage the product and make it less ineff ective or even ineff ective in
the event of an accident.
SOURCES OF HIGH-TEMPERATURE
6
Helmets can be damaged if exposed to temperatures over 60 degrees Celsius. Dark
vehicles and storage bags may exceed this temperature on hot days. A heat-damaged
helmet can start to deform inside the protective foam. A damaged helmet must be
replaced immediately.
IMPORTANT INFORMATION
7
If the helmet was exposed to an impact, it could suff er damage that is not visible
to the naked eye. Despite the lack of visible damage, the helmet may no longer
serve its purpose, so the helmet should be replaced immediately after impact.
Please note that although the helmet is correctly installed, the product is not able to
protect the wearer from all injuries. Even at low speeds, serious injuries to the head,
neck, or spine can occur. Always exercise extreme caution, wear a properly fi tting
helmet, and read these instructions carefully.
WARNING !: This helmet should not be used by children while climbing or doing
other activities when there is a risk of strangulation/hanging if the child gets trapped
with the helmet. The helmet contains elements that are made of materials that,
when in contact with hydrocarbons, cleaning fl uids, paints, transfers, or other
extraneous additions, may react which may damage the helmet or reduce its
protective properties
•
Helmet for cyclists, scooter users, skateboarders, and rollerbladers
•
Size S, 48-52 cm
•
Helmet weight: 320g
•
Year and quarter of production. week 12/2021
12
Werbung
