Operation - Laserworld Cs-2000 Rgb Net Bedienungsanleitung
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
Manual: Club Series CS-2000RGB NET
8. Operation
1.
Connect the power cable to the device and then to the mains
2.
Press „ON" to switch the device on
Your device runs in the auto mode:
3.
Dip switch setting
switch
1
On (1) / Off (0)
0
4.
Your device runs in the music mode:
Dip switch setting
switch
1
On (1) / Off (0)
0
5.
Control the music-sensitivity by the trim pot at the rear side of the device. The LED is
flashing when the device is triggered.
Your device runs in the DMX mode:
6.
Dip switch setting
switch
1
Binary DMX
1
channel offset
To get laser output, DMX channel 1 needs to have a value greater than 0 (recommended 64
to 192), and DMX channel 2 also needs to have a value greater than 0.
DMX settings
channel
range
1
0-63
64-192
193-255 Strobe with increasing speed
2
0-255
3
0-192
193-255 Automatic size change of X axis with increasing speed
4
0-192
page 7 / 22
2
3
4
0
0
0
2
3
4
0
0
0
2
3
4
5
2
4
8
16
function
Laser intensity from off to full brightness
(only if lasers support analog modulation)
Laser full brightness
select the laser frame pattern
Size of the laser projection X axis
Size of the laser projection Y axis
5
6
1
0
5
6
0
0
6
7
8
9
32
64
128
256
7
8
9
0
0
1
7
8
9
0
0
1
10
has to be on (1) for DMX mode
10
0
10
0
Kapitel
Inhaltsverzeichnis
