Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Support And Warranty; Pièces Et Composants; Avant Utilisation; Installation Du Produit - cecotec GRANDHEAT 2090 BUILT-IN STEEL Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 39
ENGLISH
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to
dispose of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.

9. TECHNICAL SUPPORT AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years,
based on current legislation, except consumable parts. In the event of misuse, the warranty
will not apply.
If at any moment you detect any problem with your product or have any doubt, do not
hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
66
GRANDHEAT 2090 BUILT-IN STEEL
1. PIECES ET COMPOSANTS
Img. 1.
1.
Panneau de contrôle
2.
Axe du plateau en verre
3.
Montage de l'anneau du plateau en verre
4.
Plateau tournant en verre
5.
Fenêtre de contrôle
6.
Porte
7.
Système de blocage de la porte
8.
Grille (utilisez-la seulement avec la fonction
Gril. Placez-la sur le plateau en verre).

2. AVANT UTILISATION

Sortez l'appareil de sa boîte. Si le micro-ondes possède un plastique protecteur, veuillez
l'enlever avant d'utiliser le produit. Inspectez l'appareil pour vérifier qu'il n'y ait aucun
dommage visible. Si vous observez un dommage visible, contactez immédiatement le Service
d'Assistance Technique de Cecotec.
Placez le produit sur une surface plate, stable et sèche, loin de tout type d'élément corrosif,
de la chaleur ou de l'humidité.
Afin d'éviter les décharges électriques, le micro-ondes doit être installé de manière à ce que
la prise soit accessible, garantissant une prise de terre efficace en cas de fuite de courant.
La porte du micro-ondes doit être fermée pour qu'il puisse fonctionner.
Si vous détectez des restes de produits provenant de la fabrication à l'intérieur de l'appareil
ou au niveau des résistances, maintenez la porte ouverte pour assurer une bonne ventilation.
Il est recommandé de réchauffer un verre d'eau plusieurs fois à haute température.
Avertissement : n'enlevez pas la plaque en mica qui protège le magnétron.

3. INSTALLATION DU PRODUIT

Installer le plateau en verre
Img. 2.
1.
Centre
2.
Plateau tournant en verre
3.
Axe du plateau en verre
4.
Montage de l'anneau du plateau en verre
FRANÇAIS
Img. 16.
1.
Écran
2.
Micro-ondes/Gril/Combi
3.
Décongeler selon le poids/temps
4. Temps/Poids/Menu automatique
5.
Stop/Clear
6.
Minuterie/Horloge
7.
Start /+30Sec /Confirm
8. Bouton d'ouverture de la porte
67
GRANDHEAT 2090 BUILT-IN STEEL

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis