Specifications; Noise And Vibration - Felisatti RH26/36CVR Bedienungsanleitung

rated voltage (VDC)
N load speed
(/min)
Blow per minite (/min)
Drilling diameter,
(max 0mm)
Single impact energy(J)
(according to EPTA procedure 01/2003.
Battery
(Li-ion)
Charger
LIST OF CONTENTS
Quick Change Drill Chuck
Plastic Box
Grease Tube
Stopper
Battery Pack Ass'y
CHECK BEFORE USE
1. The power source
Observe correct main voltage. The voltage of power source
must agree with the voltage speciied in the name plate.
Make sure the rated voltages in the electric drill and the
battery are the same.
When the rated voltage of the battery is higher than that of
the electric drill, the motor can be damaged by ire.
2. Attachment of the battery
Make sure the battery is attached correctly before you use
the electric tool.
Make sure the battery is attached in the body of the tool tightly
before you start operation. When the battery is not attached
tightly, it may be fallen during the operation and cause an
injury in the top of your foot.
3. Polarity of the battery
When the polarity of the battery is not correct, it may cause
the trouble of the switch. Also, the reversal of the rotating
4
Model
right rotation
left rotation
Concrete
Brick work
(with core bit)
Steel
Wood
Weight(kg)
Tool holder
BATTERY AND CHARGER SPECIFICATIONS
Model
Voltage (VDC)
Capacity (mAh)
Weight (kg)
Model
Input Voltage (VaC)
Output Voltage (VDC)
Charging Current (A)
Charging Time (min)
Weight (kg)
Safety Class
1 ST
1 ST
1 EA
1 EA
2 ST

SPECIFICATIONS

direction can bring a dangerous situation.
4. Trial run
Check the tool by a trial run with the grinding stone faced the
place no man there.
AN EXPLANATION OF SYMBOLS
Return waste material
The battery temperatures over 50 cause damage
Do not incinerate the battery pack
Do not dispose of batteries with general refuse.
1. Noise emission
Noise emission values determined according to EN 60745
The A-weighted emission sound
pressure level(LpA)
The A-weighted emission sound
power level(LwA)
RH26/36CVR
36
0-1150
0-1100
0-5010
28
68
13
30
2,8
4,8
SDS-plus
BL36001
36
2600
1,25
C36038
230
41,5
6
30(2,6 Аh)
1,2
II

NOISE AND VIBRATION

100 dB(A)
89 dB(A)