Storage And Maintenance - Sky SVP17 7 in 1 Bedienungsanleitung

Moving method
Handle – two handles are designed on both ends of the middle cover. When
moving the Product, lift the end opposite of the castor, grasp the handle and
move the Product to the desire place.

Storage and maintenance

surface cleaning
Before cleaning, ensure the power switch is turned off and the attaching plug is pulled out of the socket. The
rubber pedal and covers can ple cleaned with a wet cloth containing detergent, and the detergent should be
removed with a cloth.
Do not clean the product with corrosive detergent such as benzene or thinner, as it may cause fading, corrosion or
crack on the Porduct. Do not splash water into the Product to avoid short circuit.
Controller: as wet cloth may cause malfunction of the controller, only dry cloth can be used.
Storage and maintenance
Make sure that the power switch is turned off and the plug is removed from the power supply.
Clean off the dust and dirt on the product and keep it clean and away from places with high temperature or high
humidity.
If the product is not in use for a long period, a dustproof cover (but if yourself) should be applied on the product to
prevent the entry of dust.
Uchwyt