Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10. SD/USB BUTTON
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
11. A & B BUTTON
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected
mode is indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In
CONTINUOUS mode, the unit reads all tracks and stops.
12. HEADPHONE INPUT
In STOP mode, you can program several tracks (20 tracks max):
- Press the STOP button to enter in the stop mode
- Press the PROG button to enter in the program mode
- Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
- Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice.
- Repeat the operation to select all the track you want to listen
- Press the play / pause button to start the playback
13. DISPLAY
Use this button to jump of 10 tracks in one press.
14. DELETE BUTTON
Use this switch to restart the track or to select the last track.
15. SD CARD SLOT
Use this button to select the next track.
16. FOLDER
The pitch will drop while the - button is pressed and return to the original pitch when it is released.
17. USB PORT
The pitch will automatically rise when the + button is pressed and return to the original pitch when
it is released.
18. +10 BUTTON
Support USB playing and you may also connect the computer with the USB cable but only when
enter into USB work mode.
19.
BUTTON
For selecting random play (button will light up).
20. HEADPHONE VOLUME
Adjusting headset volume
6
Werbung
