Garmin eBike Anweisungen Seite 3

Pairing the Remote with Your eBike
The first time you connect the Garmin eBike remote to your compatible eBike, you must pair the remote with
your eBike.
1 Bring the remote within 1 m (3 ft.) of the eBike.
NOTE: You must stay 10 m (33 ft.) away from other ANT+
2 Turn on the eBike.
3 On the Garmin eBike remote, hold two keys simultaneously until the status LED starts alternating green and
red, and release the keys.
The remote searches for your eBike. After the remote pairs successfully, the status LED flashes green 6
times.
After the remote is paired, it connects to your eBike whenever it is in range and turned on. You may need to
wake the remote by selecting any key.
Pairing the Remote with Your Edge Device
The first time you connect the Garmin eBike remote to your Edge device, you must pair the remote with your
device.
1 Bring the remote within 1 m (3 ft.) of the device.
NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors while pairing.
2 From the Edge home screen, select
3 On the remote, hold two keys simultaneously until the status LED starts alternating green and red, and
release the keys.
The remote searches for your device. When the remote pairs successfully, the status LED flashes green 6
times, and the remote name appears on the device.
4 Select the remote, and select Add.
After the remote is paired, it connects to your device whenever the device is in range and turned on.
Using the Mounts
Several mounts are available for your remote, either included with the product or as an optional accessory. The
mounts allow you to attach the remote to your body, your bike, or other objects.
• Align two of the notches
• Press gently on the release tab
Installation Instructions
> Sensors > Add Sensor > Edge Remote.
with the sides of the mount, and press the remote into the mount until it clicks.
, and lift the remote from the mount.
® sensors while pairing.
3