Reset Function - INTEZZE EGO 2 Bedienungsanleitung

Pairing one earphone (MONO)
In order to listen with only one earphone, pair both earphones with the phone
first. Then insert both earphones back into the case and remove only the
earphone that you want to use. Only one earphone will connect automatically.

RESET function

If the earphones fail to connect/only one of the earphones is functional, you can
reset them using the reset function:
1) Delete "Intezze EGO 2" from the list of paired devices on the phone.
2) Remove both earphones from the case and switch them off by holding the
touch areas for approx. 5 seconds.
3) Activate the RESET function by holding the touch areas for approx. 10
seconds. Successful reset is confirmed by the LED indicator lights,
which quickly flash red 3 times on both earphones.
4) Now switch on the earphones again and repeat the pairing process with
the phone.
EN