INTEZZE EGO 2 Bedienungsanleitung Seite 3

ON/OFF
ATTENTION! Fully charge the earphones together with the case prior to first use.
1) The earphones automatically switch on after removing them from the case
and switch off after inserting them back.
2) You can switch the earphones on manually by holding the touch area for
approx. 5 seconds (switch off by holding for approx. 5 s).
3) The earphones will switch off automatically if they are not connected to
any device for 5 minutes.
Pairing
Prior to the first use with every device, it is necessary to pair the earphones.
Pairing does not have to be performed again and the earphones automatically
try to connect to any previously paired devices within range.
1) Remove both earphones from the case and wait for about 3 seconds
before pairing mode is activated.
2) Select "Intezze EGO 2" from the available BT devices on your phone
and select connect (if necessary, confirm the intention to pair the
earphones).
EN