Maintenance - Zipper ZI-UVGW 1 Bedienungsanleitung

3 ASSEMBLY
1. Use 2 knob M8 to fix the axis with wheel on
the lower rail. pls noted that the hole must
be fit, as picture 1.
2. Fix the two circle on the steel tube with
M6X40 screw and nut M6, as picture 2.
3. Join the two steel tube, fix the box on the
steel tube with two M6X35 screw and two M6
nut, as picture 3.
4. Put the circle bucket on the circle, and place
the bag.
5. Put the square bucket in the box.
All manuals and user guides at all-guides.com
Fig. B
Fig. C
Fig. D

4 MAINTENANCE

The machine does not require intense mainte-
nance. However, to ensure a long lifespan, we
strongly recommend following the upkeep and
maintenance plan.
Repairs must be carried out by specialists! Use
original ZIPPER parts only!
4.1 Upkeep and Maintenance
schedule
Activities
Loose or lost screws,
nuts, bolts
Damage of any part
of the machine
Machine cleaning
4.2 Disposal
Do not dispose your ZI-UVGW1 in
the residual waste! Contact your
local authorities for information
about best available disposal pos-
sibilities in your area.
Frequency
Regularly prior to
each operation
Regularly prior to
each operation
Regularly after opera-
tion
7