Safety Lock; Control Panel - Gorenje SBR 1000 BE Gebrauchsanweisung

without first putting bowl properly in
place.
Be certain cover is securely locked in
•
place before operating appliance
Never feed food by hand. Always use
•
food pusher.
Do not attempt to defeat the cover
•
interlock mechanism.
Always operate blender with cover in
•
place.
When blending hot liquids, remove
•
center piece of two-piece cover.
Do not use the appliance if juicer filter is
•
damaged or broken.
This appliance is not intended for use by
•
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety. Children should be
supervised to ensure that they do not
play with the appliance.
• Noise level: Lc < 83 dB(A)
This appliance is marked according to the European
directive 2012/19/EC on Waste Electrical and
Electronic Equipment (WEEE). This guideline is the
frame of a European-wide validity of return and
recycling on Waste Electrical and Electronic
Equipment.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY!

Safety lock

For your own protection the model SBR1000BE has
built-in safety lock system. It prevents the run of the
appliance until the food processor is not assembled
correctly.
When you choose your accessory (for example,
blender), you must place it properly on the motor unit.
You can use only one accessory at the same time.
The chosen accessory is placed correctly when the
signs on the motor unit and on each accessory are in
the same way. Then you must turn selected accessory
clockwise and you will hear a "click".
When finished the working, you must turn the chosen
accessory anti-clockwise.
For better understanding check the photos B,C,D and
E.

Control panel

• After properly placing the selected accessory on
the motor unit, turn the operation knob to activate
the unit from its off position. Choose the reqested
speed.
• For intermittent use, press onto "PULSE" or "ICE"
button.
CAUTION: Button "PULSE" must be held in
»PULSE" position for appliance to run. Food
processor will stop as soon as button is released.
When choosing "ICE" button, you do not have to
hold this button for appliance to work.
• You should use PULSE and ICE functions to
prevent over blending of foods.
CHOPPER
CAUTION : Make sure that the unit is unplugged from
power source and operation button is on "OFF" before
inserting or removing any attachments and before
cleaning.
WARNING: Use extreme caution, blades
are sharp.
• IMPORTANT: The chopper bowl will not operate if
the security cover is not closed correctly and if it is
not placed properly on the motor unit.
WARNING: To reduce risk of injury, never place
the chopping blade on the motor unit without
first putting the bowl properly in place.
• First place the bowl for chopper correctly on the
motor unit. The signs on the motor unit and on
chosen accessory must be in the same way. Then
you must turn selected accessory clockwise and
you will hear a "click". Place the motor shaft on the
motor unit
• Place the chopping blade on the shaft inside the
bowl.
• Make sure that the chopping blade is correctly
positioned in its place.
• When the chopping blade is placed, put the
chosen ingredients in the bowl. Then place the lid
of the chopper correctly and turn on the appliance.
For better understanding check the photo B.
WARNING: Use extreme caution – Blades are
sharp, handle carefully. Always hold the
chopping blade by the upper plastic part. After
using the chopping blade, always take it out of
the bowl before removing the processed food.
23