Flytec Element Handbuch Seite 9

fter navigating
The route will remain in active mode until you deactivate it, even if you
switch o your Element. You cannot edit the route until you deactivate it.
Press and hold . Deactivate «Route » by pressing
Your waypoints list and route are stored separately in the device's memory. Therefore,
deleting the route will not erase the waypoints from your stored waypoints list.
Similarly, deleting individual waypoints from your waypoints list will not remove them
from a saved route.
To delete a route:
Press and hold , then select «>Route». Press
Use the arrow keys to select «>Delete». Press
You will see the prompt «Delete route?» Press
The route will be erased, but your Element will retain the waypoints in its list.
Erasing waypoints is easy. To erase waypoint HouseThermal:
Press and hold , then use the arrow keys
«>Waypoints». Press .
Select «>Edit» and press .
Use the arrow keys to select «HouseThermal».
Press to delete.
Your waypoint HouseThermal has been deleted from the waypoints list. If your saved
route includes HouseThermal, the route will still contain this waypoint.
16 Navigation
.
.
.
.
to select
eneral information
Flytec will also issue rmware updates from time to time to improve your
Element's performance and to update you with new features, such as
airspace support. These will be easy to install, drag-and-drop les just like your
tracks. Check the Flytec website for the latest rmware and news about your Element.
If you choose to power your Element with NiMH rechargeable batteries, it is
important to con gure the power supply setting on the device.
Press and hold , then use the arrow keys
«>Instrument settings». Press
Select «>Battery type» and press
Use the arrow keys to select «NiMH». Press
Press to return to the Main Setup Menu.
Never remove the batteries until you rst switch o your Element. We do not
recommend using NiCad rechargeable batteries.
Store your Element in its cloth bag in a clean, dry place. Never expose the
device to water, extreme temperatures, or mechanical force.
Should your Element lock up, you may perform a hard reboot by removing the
batteries for ve minutes and then replacing them.
Flytec provides a 2-year warranty on all our ight instruments, and we encourage you
to contact us via our website any time for support. After your warranty has expired we
will still repair your Element at a reasonable charge.
Happy ying!
to select
.
.
.
General information 17