STARTING THE SYSTEM
The system starts automatically when pedaling or when pressing
the controller button.
The system goes into standby mode after 10 seconds.
OPERATING SYSTEM
Changing modes: short press of the button.
Changing sensitivity of Auto setting: press and hold button for 4 s.
LED lights up for only 1 second.
High Sensitivity
(More Plush)
Automatic
Manual
Low
Battery
All manuals and user guides at all-guides.com
Low Sensitivity
( More Pedaling
Mid Sensitivity
efficiency
)
1. HOW TO USE THE SYSTEM
SAG SETUP
We recommend setting up the SAG of the rear shock to a value
of 30%. To set the SAG of the fork, we suggest that you follow
the fork manufacturer's recommendation. A good starting point
however is 25%.
Removing
the battery