Alarm Function - Jvd Rb9380 Bedienungsanleitung

Press "MODE" button select to view alarm Time, "ALARM TIME" display on LCD.
⚫
When viewing "Alarm Time", hold "MODE" button for 3 seconds to enter alarm time
⚫
setting. Press "▲" or "▼" button to adjust the alarm time. Press "MODE" button to
confirm the setting.

4.3 Alarm Function:

Press "AL ON/OFF" button to activate or deactivate the alarm. If the alarm is on, alarm icon
⚫
" " appears on the display.
Press "SNOOZE" button when alarm alerts. The alarm snoozes for around 5 minutes, then
⚫
it alerts again. Alarm icon flashes on the LCD during the snooze time. This process can be
repeated 7 times.
Except "SNOOZE" button, press any buttons to stop the alarm. Otherwise, base on the
⚫
previous setting of alarm sound duration, the alarm alerts for 2 minutes or 1 minute, then
stops automatically.
5. Thermometer
If the temperature is out of the measurable range, LL.L (beyond the minimum temperature)
⚫
or HH.H (beyond the maximum temperature) will be shown on the LCD.
6. Precautions
The clock loses its time information when the battery is removed.
⚫
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
⚫
Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning
⚫
agents may scratch plastic parts and corrode electronic circuits
12