Umarex Laserliner CompactCross-Laser Pro Bedienungsanleitung Seite 18

Application (app)
An app is required to use the digital connection. You can download the app
from the corresponding stores for the specific type of terminal device:
!
Make sure that the wireless interface of the mobile device is activated.
After starting the app and activating the digital connection, a connection
can be set up between a mobile device and the measuring device.
If the app detects several active measuring devices, select the matching device.
This measuring device can be connected automatically the next time
it is switched on.
Additional functions via the app
The app offers a range of additional functions. If it is not possible to control
your device via the app for technical reasons, reset the device to the factory
settings by switching it off and back on again so that you can continue to use
the regular functions without problems.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure
it produces accurate measurement results. We recommend carrying out
calibration once a year.
18
EN